Lens Changing Instructions and Care and Use for Tifosi Half Frame Models
Applies to Tifosi models: Crit, Tyrant, Rivet, Shutout, Strikeout, Veloce, Vero, Wasp, and Wisp. Lenses must be interchanged one at a time.
To Remove a Lens:
- With the sunglasses facing towards you and the arm fully extended, pinch the nose bridge with your thumb and index finger. Pinch the outside edge of the lens with your opposite thumb and index finger.
- Gently pull your hands apart as you pivot the lens down and out of its socket at the nose piece.
- Pull the lens down and out of its anchor at the outside of the frame.
- Repeat steps 1-3 with the opposite lens.
Note: The lens with the Tifosi logo is the left eye lens.
To Install a Lens:
- Place the lens anchor into the outside corner of the frame.
- Pivot the lens back up towards the nose piece making sure that the top of the lens fits into its slot under the top of the frame.
- Placing the bottom of the lens in your palm and your fingers on top of the frame, compress the lens back into its socket until it clicks into place.
- Repeat steps 1-3 with the opposite lens.
- Using your Tifosi® Microfiber cleaning bag, wipe any fingerprints off the lenses.
Cleaning and Maintenance: Use the microfiber cleaning bag for storage and protection. If sunglasses are dirty, use the cleaning bag to wipe them. If needed, rinse with mild soap and warm water. We recommend regular cleaning and wiping to help maintain the lenses. Avoid the use of solvents, such as alcohol and acetone, and of aggressive cleaning chemicals, as these may impair the functionality of the sunglasses.
Storage: TIFOSI sunglasses should be kept in their case, to a temperature between -10C to 35C. Avoid exposure to sun without air conditioning in closed environments such on the dashboard of the car, because temperatures reached in these conditions can damage the functionality of the sunglasses. If the lenses are worn (eg, scratched or opaque), it is recommended to replace with genuine spare TIFOSI original parts.